May 2008


I don’t think I’ve done much writing about GForce Software on these threads. Which is odd. GForce Software are, without question, among the elite of commercial independent audio developers - along with fxpansion, SonicCouture, Audio Damage, Ohm Force - that are cool beyond all reasoning.

I know, “cool”… what does that mean, right? A word so overused as to be meaningless, a verbal tick slightly better than people who stammer “you know” every three words. But I feel about these developers the way I felt about certain independent record labels during my formative music years, labels like Homestead, Touch & Go, SST: creative, adventurous, with a lot of attitude and the taste to back it up. In some ways, as a fan, it felt you had a relationship with these companies because they were run by a few individuals who knew their shit. I didn’t always like everything they were putting out, but I was almost always interested and had respect for their choices.

Imperfect and over-thought analogies aside, you get the point.

The first GForce product I procured was the MTron, which I still love, though, let’s face it, has limited use. (Disclosure: I don’t have the 3rd Tape bank, so I’m about 20 sounds short of the full sounds. I’m holding out for the promised MTron Pro.) But I’m fascinated by vintage sounds so this was one of the first VSTs I bought. Then I got impOSCar, which is still my go-to softsynth. Really, I can’t stress enough how much I love that software. The beauty of GForce products is that in addition to sounding great they seemed to be designed by actual musicians. While sometimes it’s fun to tuck into a multi-page synth that makes you feel like you’re trying to solve a rubic’s cube, the amount of milage GForce get out of a single screen on impOSCar is truly impressive. And, yes, it screams like a bastard.

(I just bought Oddity; I haven’t really had a chance to explore it or utilize it.)

So I was very excited when I heard that GForce were producing a sample-based instrument of the great string machines of years past. I was listening to M83 a lot at that point, so I couldn’t wait to get my hands on it. Unfortunately, when it finally was released I was skint, so it wasn’t until a few months ago that I finally got around to ordering it.

Not that GForce products are expensive; they’re really cheap compared to a lot of other synth makers, especially considering the quality. I was just really broke and short on work.

And, yep, it’s already been used on a few tracks. I’ve heard some people write it off as a “one trick pony” on boards and a few bone-headed reviews. This couldn’t be more wrong. The depth of sound is perhaps not all-encompassing but it’s certainly not limited. It is very versitile. And with the additional control built into the smartly designed but still classy GUI it can do a hell of a lot more than just lush pads.

Though, if you like lush pads this shit is a no brainer.

Share/Save/Bookmark

Tags: , , , , ,

MenuMagic v1.0I know it may seem redundant to purchase an application that more or less replicates a lot of built-in functionality for a program, but if you’re a user of Cakewalk’s Sonar or, especially, Project 5, you will probably be well served by Agitated State’s forthcoming MenuMagic v1.0.

MenuMagic extends your control over plugin organization in both of Cakewalk’s flagship sequencers in just about any way you might care to have them extended, from global renaming to cross-application synchronization to intelligent categorization and beyond.

This has been in development for quite a while - I think it was first announced shortly before Sonar 6, and to be honest with you, not only had I forgotten about it, once Sonar got the plugin manager I thought it would probably go away.

Fortunately, it did not. The built-in Sonar plugin manager is quite handy, but even it has its limitations. This appears to address most, if not all, of those.

What really sold me on this is that it takes care of a major oversight in the Project 5 v2.5 update. Hey, swell, we got the plugin manager, but for some odd reason there is no plugin organization in the program itself. Being that the primary focus of Project 5 was as a softsynth studio this is a rather bizarre omission. And since that update was, what, a year ago? one wonders if once again Cakewalk doesn’t really have any idea what to do with the program and that sooner or later, when they milk the last few dollars from it, they’ll retire it for good. Which leaves one wrestling with absurdly messy plugin management.

Anyway, MenuMagic will now take care of this, one of my two biggest gripes about the program (non-configurable hardware outs being the other; seriously, if I’m not using outs I should be able to not have them cluttering up my workspace). So even if/when Cakewalk lets Project 5 wither on the vine I’ll be able to squeeze a few more years of life out of it.

And now is the time to act. Agitated State is extending the pre-release price of $24.99. Which is about the perfect price for such software.

Share/Save/Bookmark

Tags: , , ,

Further my explorations in finishing my audio rig, I’m getting close now. So very close.

I had ditched the Alesis i|o 26 a while ago due to its really poor drivers. This pretty much convinced me that I don’t like firewire audio interfaces. I don’t see the point really when you have a desktop computer and latency is important. In my experience, PCI drivers are more solid. Perhaps on a Mac this is different, but even the heralded RME drivers used way too much CPU when I pushed them at all.

For a while I reverted to my EZbus/Audiophile setup. M-Audio may make absolute crap but they know how to write a driver, or at least a solid PCI card driver. And I didn’t have to worry about the quality of the card’s converters or clock since it was handing those duties off to the EZbus Mixer. But I quickly remembered why I ditched this setup in the first place. Sure, the output amplifiers on the EZbus are really nice, but the pre-amps have little-to-no headroom which makes them pretty useless for any sort of line-in. I’m guessing that the converters and clock are above average at best. And the loop-back latency is huge. Plus there are a few other limitations that I won’t bother to enumerate but make it a less than ideal recording rig, digital lofi or no.

So, after another round of reading specs and gearslutz.com threads, I bought a Lynx L22 card. I contacted the guys at Mercenary Audio, who are fortunately just up I95 about 20 minutes, and they had one in stock.

Let me take a minute to say a few kind words about Mercenary. Obviously, I’m lofi. And kind of thick. On top of which, I don’t have a lot of money to throw around. I’m not entirely their target customer. But they treated me with complete respect, answered all my stupid questions, and helped me understand my purchase. They also showed me around their studio and workshops, which was very inspiring. I can’t recommend them enough. I really look forward to being able to business with them again.

The Lynx was a painless install. More importantly, the difference in the sound was stunning. The same night that I installed it, the friend that I record with came over. I didn’t tell him about the upgrade and just pulled up a song we had been working on. “The bass sounds great,” he said a few bars in. “What did you do to it?”

Seriously, insert your favorite audio snob cliché: “Blanket lifted off the mix…” “…punchy…” “tight bottom end…” et cetera. I just know that a lot of the muddiness that I/we had been struggling with was either cleared up or much easier to sort out. Even running into the EZbus (via SPDIF, so clocked and covereted by the L22) the improvement was stunning.

But the problem was basically, what to use as an interface. The EZbus wasn’t going to cut for the aforementioned reasons, and I don’t have the dosh to splash out on a summing box, outboard converters or an AES mixer. Nothing was really worth my trouble in my price-range after blowing my load on the card itself. Then it occurred to me: just use the Alesis as an small mixer, and save myself a lot of expense and hassle.

So I get all the advantages of the Alesis (multiple in and outs, SPDIF, optical, phono) but I don’t have to worry about its shortcomings. It’s converters, as near as I can tell, aren’t all that bad, but since I’m summing to the Lynx, as well as sending my analog signal to the L22, it is basically souped up patch-bay. And for that it works pretty well.

All I need now is a decent pre-amp.

So my advice to you bedroom producers and project studio jockeys: scrimp and save and get yourself a decent soundcard. It’s worth it.

Share/Save/Bookmark

Tags: , , , ,

Mix BusThis blog? You should be so lucky.

My extended absence can be blamed on many things - you know, the work/life/relationship bits I occasionally allude to - but mostly it’s because as of my last post (or thereabouts) I’ve been sans cigarettes. Yeah, I’ve retired my beloved and longtime companion, American Spirits. The fuel for many late nights at my DAW, the thing that keeps me focused while I put together posts here, my blessing and curse. After almost 30-something years it’s finally time to figure out how I can live my life without this glorious crutch.

Of course, I’m great at quitting. I’ve done it many times. (As the old joke goes.) But I really want to become a non-smoker. I’ll really try not to become a complete asshole about it - hell hath no fury like a smoker reformed - but cost, potential ill-health and social stigma have gotten to be too much for me to afford.

It will be a couple of weeks soon, and hopefully I’ll be able to do something other than glower at life and obsess on justifications for something that ultimately makes me feel shitty about myself.

Share/Save/Bookmark

Tags: ,